Jigger Machine for Mineral Processing Separating

Jigging Machine Application
Jigging machine or jigger is widely used the pretreatment of bulky grain ore, such as tungsten, copper, antimony, gold, manganese ore and other metal mine's mill run.

Application and performance
Jigging is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
A traditional jig is mostly driven by eccentric circle, its jigging pulse curve is mostly sine wave, the upward or downward flow rate generated by the diaphragm movement and action time are almost same, therefore, it is not conductive to jigging bed dilation and stratification according to the proportion of mineral particles, and affects the sorting ratio and recovery of equipment.

Saw-tooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; The upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; Water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level; It is one of the ideal energy-saving gravity concentration equipments.

Jigging Machine Advantages
1. Much softer movement pattern for significantly better catch
2. Smaller and lighter, making setup and placement easier
3. Multi-purpose
4. Other machines are often too strong and damage the squid.
5. Metal gravity separation.

Feature
High capacity
High concentration ratio and high recovery
Fabricated with highest quality material
Easy to install, operate and maintain
The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
Saving water 30-40% than ordinary jig
The pulsation speed very easy adjusted by regulator
Suitable for roughing and de-sliming
Can achieve good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.

Jigging Machine Working Principle
Jigging machines are intended for gravity separation by method of jigging. They are used for preparation of coals, ores of ferrous and non-ferrous metals with high efficiency of separation.
Jigging machines are equipped with modern system of pneumatic drive due to which efficiency of separation is essentially improved. Control system of jigging machine is intended for automatic control by process of jigging ensuring possibility of integration in control system of upper level with access to all technological parameters.

Jigging machine for washing sands of alluvial deposits: Jigging machines of the present class are designed according to module principle. In the heart of their design is lying module of jigging machines GRAVICON-4M.
Module is intended for washing sands of alluvial deposits and milled ores of non-ferrous metals of size up to 25 mm with possibility of mounting on dredges 250m3/h. Jigging machines in quantity of 11 pieces consisting of two modules were installed at the Navoi (Uzbekistan) mining and beneficiation plant, where they successfully operate at present.